When it comes to carpet cleaning, steam cleaning comes under the top choices by the experts. Many homeowners wonder how to clean their carpets to the perfection, and for them steam carpet cleaning the best solution. Steam cleaning requires a machine, cleaner, and water. Here, we have suggested the steps you have to follow for the proper utilization for a steam cleaner and get the promising results. If you are a beginner and looking for a guide to use a steam cleaner, then you have landed on the right page. Keep reading further to get the best results.
Follow the below-mentioned steps to steam clean your carpet
Step 1: Select a time when the carpet can be dried
Steam cleaning the carpet is a serious task, so, it has to be planned properly. A proper plan can bring the best results from the procedure. The most important thing before starting steam cleaning is to choose a suitable time. You need to consider two things before starting the cleaning process that are:
- The day should not be humid (as the moisture in the air will not let the carpet dry).
- There are fewer people in the house which means less foot traffic.
Step 2: Select the best cleaning solution for the cleaner
There are a number of cleaners that do not need any solution or chemical for the cleaning process, while many machines need the cleaning solutions. If you have a machine that requires a cleaner, then make sure to use the best solution for it. Look for the cleaning solutions with a PH of 10 or less; the ones having PH higher than 10 may damage or affect the carpet in a bad way.
Or you can opt for vinegar if you want to keep it natural. Vinegar is one of the best natural cleaners and has the ph range from 2.5 to 4. It does a great job of cleaning a carpet when used with baking soda.
Step 3: Vacuum The Carpet Carefully
Remove all the furniture and decorative items from the room where you are planning to clean the carpet. Vacuum the carpet slowly across the entire room, so, all the big dirt particles and other impurities are removed.
Step 4:Bring the Steam Cleaner into action
While vacuuming the carpet you can heat up the steam cleaner and fill it with the cleaning solution. Move the machine back and forth starting from one end of the room to the other. After running the machine using the cleaning solution, repeat the process with clean water. This should be done to remove the cleaning solution residues on the carpet in order to get the desired results.
Step 5: Let the carpet dry
Once the cleaning process is done, switch on the fans or air conditioners to speed up the drying process. Drying time may vary depending on the fabric and length of the carpet.